Tips For Troubleshooting Your Home Alarm System In Brownsville
False alarms and system hiccups can be exasperating, and more importantly, could prevent your home security system from doing its job effectively. Thankfully, most issues, from dead batteries to false alarms, are simple to fix. Explore our suggestions for troubleshooting your home alarm system in Brownsville. We’ll help keep your family protected and your system running as it should.
Test Your Home Security System In Brownsville
One effective way to troubleshoot your property’s defense is to test it yourself! Modern systems have a test mode so you don’t mistakenly prompt an emergency response from monitoring agents. After moving to test mode, do the following:
- Activate your system as you normally would when going out.
- Open a door or window that uses a contact sensor, or test other equipment. Close the window or door so it doesn’t trip the alarm when you turn the system back on.
- Allow the alarm to go off for 60 seconds to make sure a transmission is delivered to the security provider and an entry is made in the alarm activity log.
- Continue testing sensors as needed
- Inspect the alarm’s activity log to verify proper function.
No need to worry, monitoring specialists will be able to see that your system is undergoing a test. Be sure to switch off test mode when you’re done. It’s smart to test once a month or anytime you change your home’s internet or phone connectivity.
Evaluate The Positioning And Condition Of Motion Sensors
Although an integral aspect of your alarm system, motion detectors are prone to false alarms. Do your part to prevent them with a few basic troubleshooting steps.
- Conduct a physical check. Are there objects that could move within the sensor’s detection area, like a curtain caught in a breeze?
- Is the sensor dirty? Dirt, cobwebs, and debris can lead to poor performance. Make sure the face is clean.
- Does the motion detector have pet immunity you can turn on? Some models can be set to ignore pets up to 100 pounds.
- When was the battery replaced? A nearly depleted battery can affect performance or lead to false alarms.
- Is the sensor pointing toward a source of heat? Excess heat from a fireplace, direct sun, or something else can cause an alarm.
Keep Batteries Ready And Look Out For Low Battery Signals
One of the great aspects of the latest home security systems is that they’ll alert you when batteries are running low. If your system is equipped with a control panel or mobile app, you’ll usually find alerts there. Depending on your alarm, you could notice an occasional beep when batteries are getting low.
Contact sensors, motion detectors, smoke detectors, and other wireless components have batteries that should be replaced every 1 to 2 years. It’s best to keep batteries ready and set a replacement schedule. Some systems also have a backup battery for the primary control panel. This battery helps keep your system running if you have a power outage and should recharge once the electricity is working again. If it fails to recharge, you should replace it.
Troubleshooting Is Easy With ADT Home Security In Brownsville
As the foremost name in home security, ADT creates systems that provide unrivaled functionality and protection. Switching to test mode is simple through the ADT+ app or MyADT.com, and you’ll always get alerts when a sensor battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Brownsville home and family. Dial (956) 291-4473 or complete our form today!